This state of the art reader provides you almost unlimited possibilities. The pure USB reader enables full RS232 communication over USB. It is not only ISO7816 compatible but IS 100% ISO7816.
Note: This is Version 1 (blue cover) smartreader+ and we are selling our last five units for a bargain prior to receiving stock of the new Version 2 (grey cover) smartreader.
Existing 3rd party software can be used through the Com Port, although connected through USB. Currently 3rd party software requires a Phoenix/Smartmouse compatible reader through a Serial/COMport.
The fullspeed USB 2.0 (USB 1.1 compliant) interface and powerfull CPU ensures the fastest communication possible. The high-end design of the reader is very firm and of high quality.
The firmware is flashable and upgradable. Future smartcards and features can be added without the need for new hardware.
The desktop software will be updated frequently. When needed a firmware upgrade will be available for free.
A built in frequency generator makes it possible to generate all regularly used smartcard frequencies.In-line IF signal strength meter.
The Smargo SmartReader + incorporates an integrated USB to Serial converter, which enables the Smargo SmartReader plus to work with all standard Phoenix compatible Linux and Windows applications
•Powerfull ARM® 91 Thumb® Processor
•High-performance 32-bit RISC Architecture
•High-density 16-bit Instruction Set
•64 Kbytes, organized in 512 Pages of 128 Bytes (Single Plane)
•16 Kbytes Internal High-speed SRAM, Single-cycle Access at Maximum Speed
•Low-power RC Oscillator, 3 to 20 MHz On-chip Oscillator and one PLL
•Supports standard ftdi_sio driver for Windows and Linux applications
•Works with most softcams (e.g. Newcs, CCcam ect.)
•Can be cascaded with more SmartReaders using a USB Hub. In Dreambox (/dev/usb/tts/X of COM-4,5,6,X)
•Supports 3.20, 3.43, 3.69,4.00, 4.36, 4.80, 5.34, 6.00, 6.86, 8.00, 9.61, 12.0
and 16.0 MHz for smartcards (T=0 and T=1)
•No switches on programmer to select the desired mode, automatic frequency controll
•5V smartcard support
•Frequency/Baudrate autocalculation and Frequency Generator
•Developer guide available.
•Works on all Dreambox Models with USB connection, also on 6 MHz with Dreambox 7025.
•Can be cascaded with more SmartReaders (>100) in 1 system using an USB Hub
•Fullspeed USB1.1/ USB2.0
•Com Port via USB
•No power supply or cables required
•Windows driver available
•The Full speed USB communication ensures fast and correct data transfer to the card
•Compatible with all Prof DVB-S/S2 devices
Download the latest firmware for the Smargo Smartreader Plus here
The manufacturer of the Smargo Smartreader+ is Argolis Argentum B.V. (Netherlands)